# This code is part of Qiskit.
#
# (C) Copyright IBM 2017, 2019.
#
# This code is licensed under the Apache License, Version 2.0. You may
# obtain a copy of this license in the LICENSE.txt file in the root directory
# of this source tree or at http://www.apache.org/licenses/LICENSE-2.0.
#
# Any modifications or derivative works of this code must retain this
# copyright notice, and modified files need to carry a notice indicating
# that they have been altered from the originals.
"""Module for builtin discrete pulses.
Note the sampling strategy use for all discrete pulses is ``midpoint``.
"""
from typing import Optional
from qiskit.utils.deprecation import deprecate_func
from ..exceptions import PulseError
from .waveform import Waveform
from . import continuous
from . import samplers
_sampled_constant_pulse = samplers.midpoint(continuous.constant)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including constant() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Constant(...).get_waveform(). "
" Note that complex value support for the `amp` parameter is pending deprecation"
" in the SymbolicPulse library. It is therefore recommended to use two float values"
" for (`amp`, `angle`) instead of complex `amp`",
pending=True,
)
def constant(duration: int, amp: complex, name: Optional[str] = None) -> Waveform:
r"""Generates constant-sampled :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, samples from the function:
.. math::
f(x) = A
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Complex pulse amplitude.
name: Name of pulse.
"""
return _sampled_constant_pulse(duration, amp, name=name)
_sampled_zero_pulse = samplers.midpoint(continuous.zero)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including zero() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Constant(amp=0,...).get_waveform().",
pending=True,
)
def zero(duration: int, name: Optional[str] = None) -> Waveform:
"""Generates zero-sampled :class:`~qiskit.pulse.library.Waveform`.
Samples from the function:
.. math::
f(x) = 0
Args:
duration: Duration of pulse. Must be greater than zero.
name: Name of pulse.
"""
return _sampled_zero_pulse(duration, name=name)
_sampled_square_pulse = samplers.midpoint(continuous.square)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including square() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Square(...).get_waveform()."
" Note that pulse.Square() does not support complex values for `amp`,"
" and that the phase is defined differently. See documentation.",
pending=True,
)
def square(
duration: int, amp: complex, freq: float = None, phase: float = 0, name: Optional[str] = None
) -> Waveform:
r"""Generates square wave :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`T=` ``period``, and :math:`\phi=` ``phase``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = A \text{sign}\left[ \sin\left(\frac{2 \pi x}{T} + 2\phi\right) \right]
with the convention :math:`\text{sign}(0) = 1`.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude. Wave range is :math:`[-` ``amp`` :math:`,` ``amp`` :math:`]`.
freq: Pulse frequency, units of 1./dt. If ``None`` defaults to 1./duration.
phase: Pulse phase.
name: Name of pulse.
"""
if freq is None:
freq = 1.0 / duration
return _sampled_square_pulse(duration, amp, freq, phase=phase, name=name)
_sampled_sawtooth_pulse = samplers.midpoint(continuous.sawtooth)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including sawtooth() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Sawtooth(...).get_waveform()."
" Note that pulse.Sawtooth() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`)."
" Also note that the phase is defined differently, such that 2*pi phase"
" shifts by a full cycle.",
pending=True,
)
def sawtooth(
duration: int, amp: complex, freq: float = None, phase: float = 0, name: Optional[str] = None
) -> Waveform:
r"""Generates sawtooth wave :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`T=` ``period``, and :math:`\phi=` ``phase``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = 2 A \left( g(x) - \left\lfloor \frac{1}{2} + g(x) \right\rfloor\right)
where :math:`g(x) = x/T + \phi/\pi`.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude. Wave range is :math:`[-` ``amp`` :math:`,` ``amp`` :math:`]`.
freq: Pulse frequency, units of 1./dt. If ``None`` defaults to 1./duration.
phase: Pulse phase.
name: Name of pulse.
Example:
.. plot::
:include-source:
import matplotlib.pyplot as plt
from qiskit.pulse.library import sawtooth
import numpy as np
duration = 100
amp = 1
freq = 1 / duration
sawtooth_wave = np.real(sawtooth(duration, amp, freq).samples)
plt.plot(range(duration), sawtooth_wave)
plt.show()
"""
if freq is None:
freq = 1.0 / duration
return _sampled_sawtooth_pulse(duration, amp, freq, phase=phase, name=name)
_sampled_triangle_pulse = samplers.midpoint(continuous.triangle)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including triangle() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Triangle(...).get_waveform()."
" Note that pulse.Triangle() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def triangle(
duration: int, amp: complex, freq: float = None, phase: float = 0, name: Optional[str] = None
) -> Waveform:
r"""Generates triangle wave :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`T=` ``period``, and :math:`\phi=` ``phase``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = A \left(-2\left|\text{sawtooth}(x, A, T, \phi)\right| + 1\right)
This a non-sinusoidal wave with linear ramping.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude. Wave range is :math:`[-` ``amp`` :math:`,` ``amp`` :math:`]`.
freq: Pulse frequency, units of 1./dt. If ``None`` defaults to 1./duration.
phase: Pulse phase.
name: Name of pulse.
Example:
.. plot::
:include-source:
import matplotlib.pyplot as plt
from qiskit.pulse.library import triangle
import numpy as np
duration = 100
amp = 1
freq = 1 / duration
triangle_wave = np.real(triangle(duration, amp, freq).samples)
plt.plot(range(duration), triangle_wave)
plt.show()
"""
if freq is None:
freq = 1.0 / duration
return _sampled_triangle_pulse(duration, amp, freq, phase=phase, name=name)
_sampled_cos_pulse = samplers.midpoint(continuous.cos)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including cos() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Cos(...).get_waveform()."
" Note that pulse.Cos() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def cos(
duration: int, amp: complex, freq: float = None, phase: float = 0, name: Optional[str] = None
) -> Waveform:
r"""Generates cosine wave :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`\omega=` ``freq``, and :math:`\phi=` ``phase``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = A \cos(2 \pi \omega x + \phi)
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude.
freq: Pulse frequency, units of 1/dt. If ``None`` defaults to single cycle.
phase: Pulse phase.
name: Name of pulse.
"""
if freq is None:
freq = 1 / duration
return _sampled_cos_pulse(duration, amp, freq, phase=phase, name=name)
_sampled_sin_pulse = samplers.midpoint(continuous.sin)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including sin() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Sin(...).get_waveform()."
" Note that pulse.Sin() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def sin(
duration: int, amp: complex, freq: float = None, phase: float = 0, name: Optional[str] = None
) -> Waveform:
r"""Generates sine wave :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`\omega=` ``freq``, and :math:`\phi=` ``phase``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = A \sin(2 \pi \omega x + \phi)
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude.
freq: Pulse frequency, units of 1/dt. If ``None`` defaults to single cycle.
phase: Pulse phase.
name: Name of pulse.
"""
if freq is None:
freq = 1 / duration
return _sampled_sin_pulse(duration, amp, freq, phase=phase, name=name)
_sampled_gaussian_pulse = samplers.midpoint(continuous.gaussian)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including gaussian() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Gaussian(...).get_waveform()."
" Note that complex value support for the `amp` parameter is pending deprecation"
" in the SymbolicPulse library. It is therefore recommended to use two float values"
" for (`amp`, `angle`) instead of complex `amp`",
pending=True,
)
def gaussian(
duration: int, amp: complex, sigma: float, name: Optional[str] = None, zero_ends: bool = True
) -> Waveform:
r"""Generates unnormalized gaussian :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp`` and :math:`\sigma=` ``sigma``, applies the ``midpoint`` sampling strategy
to generate a discrete pulse sampled from the continuous function:
.. math::
f(x) = A\exp\left(\left(\frac{x - \mu}{2\sigma}\right)^2 \right),
with the center :math:`\mu=` ``duration/2``.
If ``zero_ends==True``, each output sample :math:`y` is modified according to:
.. math::
y \mapsto A\frac{y-y^*}{A-y^*},
where :math:`y^*` is the value of the endpoint samples. This sets the endpoints
to :math:`0` while preserving the amplitude at the center. If :math:`A=y^*`,
:math:`y` is set to :math:`1`. By default, the endpoints are at ``x = -1, x = duration + 1``.
Integrated area under the full curve is ``amp * np.sqrt(2*np.pi*sigma**2)``
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude at ``duration/2``.
sigma: Width (standard deviation) of pulse.
name: Name of pulse.
zero_ends: If True, zero ends at ``x = -1, x = duration + 1``, but rescale to preserve amp.
"""
center = duration / 2
zeroed_width = duration + 2 if zero_ends else None
rescale_amp = bool(zero_ends)
return _sampled_gaussian_pulse(
duration, amp, center, sigma, zeroed_width=zeroed_width, rescale_amp=rescale_amp, name=name
)
_sampled_gaussian_deriv_pulse = samplers.midpoint(continuous.gaussian_deriv)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including gaussian_deriv() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.GaussianDeriv(...).get_waveform()."
" Note that pulse.GaussianDeriv() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def gaussian_deriv(
duration: int, amp: complex, sigma: float, name: Optional[str] = None
) -> Waveform:
r"""Generates unnormalized gaussian derivative :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp`` and :math:`\sigma=` ``sigma`` applies the `midpoint` sampling strategy
to generate a discrete pulse sampled from the continuous function:
.. math::
f(x) = -A\frac{(x - \mu)}{\sigma^2}\exp
\left(-\frac{1}{2}\left(\frac{x - \mu}{\sigma}\right)^2 \right)
i.e. the derivative of the Gaussian function, with center :math:`\mu=` ``duration/2``.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude of corresponding Gaussian at the pulse center (``duration/2``).
sigma: Width (standard deviation) of pulse.
name: Name of pulse.
"""
center = duration / 2
return _sampled_gaussian_deriv_pulse(duration, amp, center, sigma, name=name)
_sampled_sech_pulse = samplers.midpoint(continuous.sech)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including sech() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Sech(...).get_waveform()."
" Note that pulse.Sech() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def sech(
duration: int, amp: complex, sigma: float, name: str = None, zero_ends: bool = True
) -> Waveform:
r"""Generates unnormalized sech :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp`` and :math:`\sigma=` ``sigma``, applies the ``midpoint`` sampling strategy
to generate a discrete pulse sampled from the continuous function:
.. math::
f(x) = A\text{sech}\left(\frac{x-\mu}{\sigma} \right)
with the center :math:`\mu=` ``duration/2``.
If ``zero_ends==True``, each output sample :math:`y` is modified according to:
.. math::
y \mapsto A\frac{y-y^*}{A-y^*},
where :math:`y^*` is the value of the endpoint samples. This sets the endpoints
to :math:`0` while preserving the amplitude at the center. If :math:`A=y^*`,
:math:`y` is set to :math:`1`. By default, the endpoints are at ``x = -1, x = duration + 1``.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude at `duration/2`.
sigma: Width (standard deviation) of pulse.
name: Name of pulse.
zero_ends: If True, zero ends at ``x = -1, x = duration + 1``, but rescale to preserve amp.
"""
center = duration / 2
zeroed_width = duration + 2 if zero_ends else None
rescale_amp = bool(zero_ends)
return _sampled_sech_pulse(
duration, amp, center, sigma, zeroed_width=zeroed_width, rescale_amp=rescale_amp, name=name
)
_sampled_sech_deriv_pulse = samplers.midpoint(continuous.sech_deriv)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including sech_deriv() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.SechDeriv(...).get_waveform()."
" Note that pulse.SechDeriv() does not support complex values for `amp`."
" Instead, use two float values for (`amp`, `angle`).",
pending=True,
)
def sech_deriv(duration: int, amp: complex, sigma: float, name: str = None) -> Waveform:
r"""Generates unnormalized sech derivative :class:`~qiskit.pulse.library.Waveform`.
For :math:`A=` ``amp``, :math:`\sigma=` ``sigma``, and center :math:`\mu=` ``duration/2``,
applies the `midpoint` sampling strategy to generate a discrete pulse sampled from
the continuous function:
.. math::
f(x) = \frac{d}{dx}\left[A\text{sech}\left(\frac{x-\mu}{\sigma} \right)\right],
i.e. the derivative of :math:`\text{sech}`.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude at `center`.
sigma: Width (standard deviation) of pulse.
name: Name of pulse.
"""
center = duration / 2
return _sampled_sech_deriv_pulse(duration, amp, center, sigma, name=name)
_sampled_gaussian_square_pulse = samplers.midpoint(continuous.gaussian_square)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including gaussian_square() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.GaussianSquare(...).get_waveform()."
" Note that complex value support for the `amp` parameter is pending deprecation"
" in the SymbolicPulse library. It is therefore recommended to use two float values"
" for (`amp`, `angle`) instead of complex `amp`",
pending=True,
)
def gaussian_square(
duration: int,
amp: complex,
sigma: float,
risefall: Optional[float] = None,
width: Optional[float] = None,
name: Optional[str] = None,
zero_ends: bool = True,
) -> Waveform:
r"""Generates gaussian square :class:`~qiskit.pulse.library.Waveform`.
For :math:`d=` ``duration``, :math:`A=` ``amp``, :math:`\sigma=` ``sigma``,
and :math:`r=` ``risefall``, applies the ``midpoint`` sampling strategy to
generate a discrete pulse sampled from the continuous function:
.. math::
f(x) = \begin{cases}
g(x - r) ) & x\leq r \\
A & r\leq x\leq d-r \\
g(x - (d - r)) & d-r\leq x
\end{cases}
where :math:`g(x)` is the Gaussian function sampled from in :meth:`gaussian`
with :math:`A=` ``amp``, :math:`\mu=1`, and :math:`\sigma=` ``sigma``. I.e.
:math:`f(x)` represents a square pulse with smooth Gaussian edges.
If ``zero_ends == True``, the samples for the Gaussian ramps are remapped as in
:meth:`gaussian`.
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude.
sigma: Width (standard deviation) of Gaussian rise/fall portion of the pulse.
risefall: Number of samples over which pulse rise and fall happen. Width of
square portion of pulse will be ``duration-2*risefall``.
width: The duration of the embedded square pulse. Only one of ``width`` or ``risefall``
should be specified as the functional form requires
``width = duration - 2 * risefall``.
name: Name of pulse.
zero_ends: If True, zero ends at ``x = -1, x = duration + 1``, but rescale to preserve amp.
Raises:
PulseError: If ``risefall`` and ``width`` arguments are inconsistent or not enough info.
"""
if risefall is None and width is None:
raise PulseError("gaussian_square missing required argument: 'width' or 'risefall'.")
if risefall is not None:
if width is None:
width = duration - 2 * risefall
elif 2 * risefall + width != duration:
raise PulseError(
"Both width and risefall were specified, and they are "
"inconsistent: 2 * risefall + width == {} != "
"duration == {}.".format(2 * risefall + width, duration)
)
center = duration / 2
zeroed_width = duration + 2 if zero_ends else None
return _sampled_gaussian_square_pulse(
duration, amp, center, width, sigma, zeroed_width=zeroed_width, name=name
)
_sampled_drag_pulse = samplers.midpoint(continuous.drag)
[문서]@deprecate_func(
since="0.25.0",
additional_msg="The discrete pulses library, including drag() is pending deprecation."
" Instead, use the SymbolicPulse library to create the waveform with"
" pulse.Drag(...).get_waveform()."
" Note that complex value support for the `amp` parameter is pending deprecation"
" in the SymbolicPulse library. It is therefore recommended to use two float values"
" for (`amp`, `angle`) instead of complex `amp`",
pending=True,
)
def drag(
duration: int,
amp: complex,
sigma: float,
beta: float,
name: Optional[str] = None,
zero_ends: bool = True,
) -> Waveform:
r"""Generates Y-only correction DRAG :class:`~qiskit.pulse.library.Waveform` for standard nonlinear
oscillator (SNO) [1].
For :math:`A=` ``amp``, :math:`\sigma=` ``sigma``, and :math:`\beta=` ``beta``, applies the
``midpoint`` sampling strategy to generate a discrete pulse sampled from the
continuous function:
.. math::
f(x) = g(x) + i \beta h(x),
where :math:`g(x)` is the function sampled in :meth:`gaussian`, and :math:`h(x)`
is the function sampled in :meth:`gaussian_deriv`.
If ``zero_ends == True``, the samples from :math:`g(x)` are remapped as in :meth:`gaussian`.
References:
1. |citation1|_
.. _citation1: http://dx.doi.org/10.1103/PhysRevA.83.012308
.. |citation1| replace:: *Gambetta, J. M., Motzoi, F., Merkel, S. T. & Wilhelm, F. K.
"Analytic control methods for high-fidelity unitary operations
in a weakly nonlinear oscillator." Phys. Rev. A 83, 012308 (2011).*
Args:
duration: Duration of pulse. Must be greater than zero.
amp: Pulse amplitude at center ``duration/2``.
sigma: Width (standard deviation) of pulse.
beta: Y correction amplitude. For the SNO this is
:math:`\beta=-\frac{\lambda_1^2}{4\Delta_2}`. Where :math:`\lambda_1` is the
relative coupling strength between the first excited and second excited states
and :math:`\Delta_2` is the detuning between the respective excited states.
name: Name of pulse.
zero_ends: If True, zero ends at ``x = -1, x = duration + 1``, but rescale to preserve amp.
"""
center = duration / 2
zeroed_width = duration + 2 if zero_ends else None
rescale_amp = bool(zero_ends)
return _sampled_drag_pulse(
duration,
amp,
center,
sigma,
beta,
zeroed_width=zeroed_width,
rescale_amp=rescale_amp,
name=name,
)