qiskit.quantum_info.DensityMatrix

class DensityMatrix(data, dims=None)

DensityMatrix class

Initialize a density matrix object.

매개변수

• (np.ndarray or list or matrix_like or QuantumCircuit or (data) – qiskit.circuit.Instruction): A statevector, quantum instruction or an object with a to_operator or to_matrix method from which the density matrix can be constructed. If a vector the density matrix is constructed as the projector of that vector. If a quantum instruction, the density matrix is constructed by assuming all qubits are initialized in the zero state.

• dims (int or tuple or list) – Optional. The subsystem dimension of the state (See additional information).

예외

QiskitError – if input data is not valid.

Additional Information:

The dims kwarg can be None, an integer, or an iterable of integers.

• Iterable – the subsystem dimensions are the values in the list with the total number of subsystems given by the length of the list.

• Int or None – the leading dimension of the input matrix specifies the total dimension of the density matrix. If it is a power of two the state will be initialized as an N-qubit state. If it is not a power of two the state will have a single d-dimensional subsystem.

__init__(data, dims=None)

Initialize a density matrix object.

매개변수

• (np.ndarray or list or matrix_like or QuantumCircuit or (data) – qiskit.circuit.Instruction): A statevector, quantum instruction or an object with a to_operator or to_matrix method from which the density matrix can be constructed. If a vector the density matrix is constructed as the projector of that vector. If a quantum instruction, the density matrix is constructed by assuming all qubits are initialized in the zero state.

• dims (int or tuple or list) – Optional. The subsystem dimension of the state (See additional information).

예외

QiskitError – if input data is not valid.

Additional Information:

The dims kwarg can be None, an integer, or an iterable of integers.

• Iterable – the subsystem dimensions are the values in the list with the total number of subsystems given by the length of the list.

• Int or None – the leading dimension of the input matrix specifies the total dimension of the density matrix. If it is a power of two the state will be initialized as an N-qubit state. If it is not a power of two the state will have a single d-dimensional subsystem.

Methods

__init__(data[, dims])	Initialize a density matrix object.
conjugate()	Return the conjugate of the density matrix.
copy()	Make a copy of current operator.
dims([qargs])	Return tuple of input dimension for specified subsystems.
draw([output])	Return a visualization of the Statevector.
evolve(other[, qargs])	Evolve a quantum state by an operator.
expand(other)	Return the tensor product state other ⊗ self.
expectation_value(oper[, qargs])	Compute the expectation value of an operator.
from_instruction(instruction)	Return the output density matrix of an instruction.
from_int(i, dims)	Return a computational basis state density matrix.
from_label(label)	Return a tensor product of Pauli X,Y,Z eigenstates.
is_valid([atol, rtol])	Return True if trace 1 and positive semidefinite.
measure([qargs])	Measure subsystems and return outcome and post-measure state.
probabilities([qargs, decimals])	Return the subsystem measurement probability vector.
probabilities_dict([qargs, decimals])	Return the subsystem measurement probability dictionary.
purity()	Return the purity of the quantum state.
reset([qargs])	Reset state or subsystems to the 0-state.
reverse_qargs()	Return a DensityMatrix with reversed subsystem ordering.
sample_counts(shots[, qargs])	Sample a dict of qubit measurement outcomes in the computational basis.
sample_memory(shots[, qargs])	Sample a list of qubit measurement outcomes in the computational basis.
seed([value])	Set the seed for the quantum state RNG.
tensor(other)	Return the tensor product state self ⊗ other.
to_dict([decimals])	Convert the density matrix to dictionary form.
to_operator()	Convert to Operator
to_statevector([atol, rtol])	Return a statevector from a pure density matrix.
trace()	Return the trace of the density matrix.

Attributes

atol	Default absolute tolerance parameter for float comparisons.
data	Return data.
dim	Return total state dimension.
num_qubits	Return the number of qubits if a N-qubit state or None otherwise.
rtol	Default relative tolerance parameter for float comparisons.

property atol

Default absolute tolerance parameter for float comparisons.

conjugate()

Return the conjugate of the density matrix.

copy()

Make a copy of current operator.

property data

Return data.

property dim

Return total state dimension.

dims(qargs=None)

Return tuple of input dimension for specified subsystems.

draw(output=None, **drawer_args)

Return a visualization of the Statevector.

repr: ASCII TextMatrix of the state’s __repr__.

text: ASCII TextMatrix that can be printed in the console.

latex: An IPython Latex object for displaying in Jupyter Notebooks.

latex_source: Raw, uncompiled ASCII source to generate array using LaTeX.

qsphere: Matplotlib figure, rendering of density matrix using plot_state_qsphere().

hinton: Matplotlib figure, rendering of density matrix using plot_state_hinton().

bloch: Matplotlib figure, rendering of density matrix using plot_bloch_multivector().

매개변수

• output (str) – Select the output method to use for drawing the state. Valid choices are repr, text, latex, latex_source, qsphere, hinton, or bloch. Default is repr. Default can be changed by adding the line state_drawer = <default> to ~/.qiskit/settings.conf under [default].

• drawer_args – Arguments to be passed directly to the relevant drawing function or constructor (TextMatrix(), array_to_latex(), plot_state_qsphere(), plot_state_hinton() or plot_bloch_multivector()). See the relevant function under qiskit.visualization for that function’s documentation.

반환값

matplotlib.Figure or str or TextMatrix or IPython.display.Latex: Drawing of the Statevector.

예외

ValueError – when an invalid output method is selected.

evolve(other, qargs=None)

Evolve a quantum state by an operator.

매개변수

• (Operator or QuantumChannel (other) – or Instruction or Circuit): The operator to evolve by.

• qargs (list) – a list of QuantumState subsystem positions to apply the operator on.

반환값

the output quantum state.

반환 형식

QuantumState

예외

QiskitError – if the operator dimension does not match the specified QuantumState subsystem dimensions.

expand(other)

Return the tensor product state other ⊗ self.

매개변수

other (DensityMatrix) – a quantum state object.

반환값

the tensor product state other ⊗ self.

반환 형식

DensityMatrix

예외

QiskitError – if other is not a quantum state.

expectation_value(oper, qargs=None)

Compute the expectation value of an operator.

매개변수

• oper (Operator) – an operator to evaluate expval.

• qargs (None or list) – subsystems to apply the operator on.

반환값

the expectation value.

반환 형식

complex

classmethod from_instruction(instruction)

Return the output density matrix of an instruction.

The statevector is initialized in the state \(|{0,\ldots,0}\rangle\) of the same number of qubits as the input instruction or circuit, evolved by the input instruction, and the output statevector returned.

매개변수

instruction (qiskit.circuit.Instruction or QuantumCircuit) – instruction or circuit

반환값

the final density matrix.

반환 형식

DensityMatrix

예외

QiskitError – if the instruction contains invalid instructions for density matrix simulation.

static from_int(i, dims)

Return a computational basis state density matrix.

매개변수

• i (int) – the basis state element.

• dims (int or tuple or list) – The subsystem dimensions of the statevector (See additional information).

반환값

The computational basis state \(|i\rangle\!\langle i|\).

반환 형식

DensityMatrix

Additional Information:

The dims kwarg can be an integer or an iterable of integers.

• Iterable – the subsystem dimensions are the values in the list with the total number of subsystems given by the length of the list.

• Int – the integer specifies the total dimension of the state. If it is a power of two the state will be initialized as an N-qubit state. If it is not a power of two the state will have a single d-dimensional subsystem.

classmethod from_label(label)

Return a tensor product of Pauli X,Y,Z eigenstates.

Table 16 Single-qubit state labels

Label	Statevector
"0"	\(\begin{pmatrix} 1 & 0 \\ 0 & 0 \end{pmatrix}\)
"1"	\(\begin{pmatrix} 0 & 0 \\ 0 & 1 \end{pmatrix}\)
"+"	\(\frac{1}{2}\begin{pmatrix} 1 & 1 \\ 1 & 1 \end{pmatrix}\)
"-"	\(\frac{1}{2}\begin{pmatrix} 1 & -1 \\ -1 & 1 \end{pmatrix}\)
"r"	\(\frac{1}{2}\begin{pmatrix} 1 & -i \\ i & 1 \end{pmatrix}\)
"l"	\(\frac{1}{2}\begin{pmatrix} 1 & i \\ -i & 1 \end{pmatrix}\)

매개변수

label (string) – a eigenstate string ket label (see table for allowed values).

반환값

The N-qubit basis state density matrix.

반환 형식

Statevector

예외

QiskitError – if the label contains invalid characters, or the length of the label is larger than an explicitly specified num_qubits.

is_valid(atol=None, rtol=None)

Return True if trace 1 and positive semidefinite.

measure(qargs=None)

Measure subsystems and return outcome and post-measure state.

Note that this function uses the QuantumStates internal random number generator for sampling the measurement outcome. The RNG seed can be set using the seed() method.

매개변수

qargs (list or None) – subsystems to sample measurements for, if None sample measurement of all subsystems (Default: None).

반환값

the pair (outcome, state) where outcome is the

measurement outcome string label, and state is the collapsed post-measurement state for the corresponding outcome.

반환 형식

tuple

property num_qubits

Return the number of qubits if a N-qubit state or None otherwise.

probabilities(qargs=None, decimals=None)

Return the subsystem measurement probability vector.

Measurement probabilities are with respect to measurement in the computation (diagonal) basis.

매개변수

• qargs (None or list) – subsystems to return probabilities for, if None return for all subsystems (Default: None).

• decimals (None or int) – the number of decimal places to round values. If None no rounding is done (Default: None).

반환값

The Numpy vector array of probabilities.

반환 형식

np.array

예제

Consider a 2-qubit product state \(\rho=\rho_1\otimes\rho_0\) with \(\rho_1=|+\rangle\!\langle+|\), \(\rho_0=|0\rangle\!\langle0|\).

from qiskit.quantum_info import DensityMatrix

rho = DensityMatrix.from_label('+0')

# Probabilities for measuring both qubits
probs = rho.probabilities()
print('probs: {}'.format(probs))

# Probabilities for measuring only qubit-0
probs_qubit_0 = rho.probabilities([0])
print('Qubit-0 probs: {}'.format(probs_qubit_0))

# Probabilities for measuring only qubit-1
probs_qubit_1 = rho.probabilities([1])
print('Qubit-1 probs: {}'.format(probs_qubit_1))

probs: [0.5 0.  0.5 0. ]
Qubit-0 probs: [1. 0.]
Qubit-1 probs: [0.5 0.5]

We can also permute the order of qubits in the qargs list to change the qubit position in the probabilities output

from qiskit.quantum_info import DensityMatrix

rho = DensityMatrix.from_label('+0')

# Probabilities for measuring both qubits
probs = rho.probabilities([0, 1])
print('probs: {}'.format(probs))

# Probabilities for measuring both qubits
# but swapping qubits 0 and 1 in output
probs_swapped = rho.probabilities([1, 0])
print('Swapped probs: {}'.format(probs_swapped))

probs: [0.5 0.  0.5 0. ]
Swapped probs: [0.5 0.5 0.  0. ]

probabilities_dict(qargs=None, decimals=None)

Return the subsystem measurement probability dictionary.

Measurement probabilities are with respect to measurement in the computation (diagonal) basis.

This dictionary representation uses a Ket-like notation where the dictionary keys are qudit strings for the subsystem basis vectors. If any subsystem has a dimension greater than 10 comma delimiters are inserted between integers so that subsystems can be distinguished.

매개변수

• qargs (None or list) – subsystems to return probabilities for, if None return for all subsystems (Default: None).

• decimals (None or int) – the number of decimal places to round values. If None no rounding is done (Default: None).

반환값

The measurement probabilities in dict (ket) form.

반환 형식

dict

purity()

Return the purity of the quantum state.

reset(qargs=None)

Reset state or subsystems to the 0-state.

매개변수

qargs (list or None) – subsystems to reset, if None all subsystems will be reset to their 0-state (Default: None).

반환값

the reset state.

반환 형식

DensityMatrix

Additional Information:

If all subsystems are reset this will return the ground state on all subsystems. If only a some subsystems are reset this function will perform evolution by the reset SuperOp of the reset subsystems.

reverse_qargs()

Return a DensityMatrix with reversed subsystem ordering.

For a tensor product state this is equivalent to reversing the order of tensor product subsystems. For a density matrix \(\rho = \rho_{n-1} \otimes ... \otimes \rho_0\) the returned state will be \(\rho_0 \otimes ... \otimes \rho_{n-1}\).

반환값

the state with reversed subsystem order.

반환 형식

DensityMatrix

property rtol

Default relative tolerance parameter for float comparisons.

sample_counts(shots, qargs=None)

Sample a dict of qubit measurement outcomes in the computational basis.

매개변수

• shots (int) – number of samples to generate.

• qargs (None or list) – subsystems to sample measurements for, if None sample measurement of all subsystems (Default: None).

반환값

sampled counts dictionary.

반환 형식

Counts

Additional Information:

This function samples measurement outcomes using the measure probabilities() for the current state and qargs. It does not actually implement the measurement so the current state is not modified.

The seed for random number generator used for sampling can be set to a fixed value by using the stats seed() method.

sample_memory(shots, qargs=None)

Sample a list of qubit measurement outcomes in the computational basis.

매개변수

• shots (int) – number of samples to generate.

• qargs (None or list) – subsystems to sample measurements for, if None sample measurement of all subsystems (Default: None).

반환값

list of sampled counts if the order sampled.

반환 형식

np.array

Additional Information:

This function samples measurement outcomes using the measure probabilities() for the current state and qargs. It does not actually implement the measurement so the current state is not modified.

The seed for random number generator used for sampling can be set to a fixed value by using the stats seed() method.

seed(value=None)

Set the seed for the quantum state RNG.

tensor(other)

Return the tensor product state self ⊗ other.

매개변수

other (DensityMatrix) – a quantum state object.

반환값

the tensor product operator self ⊗ other.

반환 형식

DensityMatrix

예외

QiskitError – if other is not a quantum state.

to_dict(decimals=None)

Convert the density matrix to dictionary form.

This dictionary representation uses a Ket-like notation where the dictionary keys are qudit strings for the subsystem basis vectors. If any subsystem has a dimension greater than 10 comma delimiters are inserted between integers so that subsystems can be distinguished.

매개변수

decimals (None or int) – the number of decimal places to round values. If None no rounding is done (Default: None).

반환값

the dictionary form of the DensityMatrix.

반환 형식

dict

예제

The ket-form of a 2-qubit density matrix \(rho = |-\rangle\!\langle -|\otimes |0\rangle\!\langle 0|\)

from qiskit.quantum_info import DensityMatrix

rho = DensityMatrix.from_label('-0')
print(rho.to_dict())

{'00|00': (0.4999999999999999+0j), '10|00': (-0.4999999999999999-0j), '00|10': (-0.4999999999999999+0j), '10|10': (0.4999999999999999+0j)}

For non-qubit subsystems the integer range can go from 0 to 9. For example in a qutrit system

import numpy as np
from qiskit.quantum_info import DensityMatrix

mat = np.zeros((9, 9))
mat[0, 0] = 0.25
mat[3, 3] = 0.25
mat[6, 6] = 0.25
mat[-1, -1] = 0.25
rho = DensityMatrix(mat, dims=(3, 3))
print(rho.to_dict())

{'00|00': (0.25+0j), '10|10': (0.25+0j), '20|20': (0.25+0j), '22|22': (0.25+0j)}

For large subsystem dimensions delimiters are required. The following example is for a 20-dimensional system consisting of a qubit and 10-dimensional qudit.

import numpy as np
from qiskit.quantum_info import DensityMatrix

mat = np.zeros((2 * 10, 2 * 10))
mat[0, 0] = 0.5
mat[-1, -1] = 0.5
rho = DensityMatrix(mat, dims=(2, 10))
print(rho.to_dict())

{'00|00': (0.5+0j), '91|91': (0.5+0j)}

to_operator()

Convert to Operator

to_statevector(atol=None, rtol=None)

Return a statevector from a pure density matrix.

매개변수

• atol (float) – Absolute tolerance for checking operation validity.

• rtol (float) – Relative tolerance for checking operation validity.

반환값

The pure density matrix’s corresponding statevector.

Corresponds to the eigenvector of the only non-zero eigenvalue.

반환 형식

Statevector

예외

QiskitError – if the state is not pure.

trace()

Return the trace of the density matrix.